PDA

View Full Version : Driver restraint system


82GT
03-21-2005, 10:36 AM
From the NHRA site

Effective Jan. 1, 2005, Y-type driver restraint system was no longer certifiable under the SFI Spec 16.1. However, existing Y-type belts with current dates of manufacture may be used until its two-year expiration period, which after that expiration date, the Y-type driver restraint system will not be certified with an SFI specification.

Racers and technical officials should be aware that V-type harnesses are certifiable to SFI Spec 16.1.

There has been some confusion regarding the difference between Y-types and V-types.

A Y-type harness consists of a single strap of webbing ending in a single attachment point while a V-type harness also has a single end attachment, but it is a continuous length of webbing that loops through the end hardware and over both shoulders, effectively providing a double belt.

If you have any further questions, contact your Division Technical Director or the NHRA Technical Department.

Below, the Y-type and V-type harnesses are illustrated.

http://www.nhra.com/2005/images/news/March/harnesses.jpg

BBLM23
03-21-2005, 12:00 PM
Yeah, I saw that. Mine was new last year. I will have to change to V next time.

Mopower71
03-21-2005, 07:05 PM
Mine was new last year also, but mine are the V type.
Thanks for the heads up.