Bracket Racing

Bracket Racing (https://www.northeastbracketracing.com/forums/)
-   General Forum (https://www.northeastbracketracing.com/forums/general-forum-13/)
-   -   Bad news from engine builder! Need bare 440 block! (https://www.northeastbracketracing.com/forums/general-forum-13/bad-news-engine-builder-need-bare-440-block-677/)

DARTSPORT 01-17-2006 07:15 PM

Bad news from engine builder! Need bare 440 block!
 
My engine builder just called. My extra 440 block is no good. Found cracks in the lifter bores. Anybody close to Ringtown, Pa. have a good 440 block?? Building a stroker motor!! Leave a message here . Or my Email is csauto@chilitech.net , or call during the day 570-889-5073, 6:30a.m. to 5:00p.m. Thanks, Paul

DARTSPORT 01-18-2006 04:32 PM

I found a block today!!

Mopower71 01-18-2006 07:37 PM

Man That sucks the lifter bores were cracked, but it's a good thing he found it.
Good to hear you found another block.
My engines are just sitting in pieces. :( Someday....

DARTSPORT 01-18-2006 08:12 PM

The block was cracked above the lifters, about 8" long . End to end, on both sides of the block. About 2" below the deck.

onehellofadart 01-19-2006 10:37 AM

Where did you find the block?

DARTSPORT 01-19-2006 10:59 AM

The cracked block came with my car when I purchased it 2 years ago. Came as an assembled, used short block. The used block that I got yesterday, I got from a guy in Archbald, Pa. . It is at engine builders getting magnafluxed and checked.

1BadMirada 01-19-2006 06:37 PM

hmmm...all we have is small block stuff..sorry.

i think that we had a 383 block laying around, but ive not been to the shop in a while having moved and such


All times are GMT -4. The time now is 01:20 AM.


© 2024 MH Sub I, LLC dba Internet Brands