Happy New Year
Senior Member
Joined: Sep 2004
Posts: 194
Happy New Year!
and
Happy New Toy!
There probably isn't too many of these but I now own two...
http://bbdart.com/mycar/kcar/kcarlaunch.jpg
and
Happy New Toy!
There probably isn't too many of these but I now own two...
http://bbdart.com/mycar/kcar/kcarlaunch.jpg
Senior Member
Joined: Sep 2004
Posts: 194
He says the white one is 2400 pounds. Normally runs 9.00?
"The engine is a 548ci Original Koffel B1 head and high rise intake with cast Aluminum B1 valve covers. With a done 1150 Holly carb. Built on a new Mopar Mega Block. Jessell Rockers and Belt Drive. Titan oil pump and pickup. Comp Cam Roller Cam with roller lifters and push rods, Valve springs and retainers. Eagle crank, JE Pistons, MGP Rods. Main Studs and lifter bores bushed. Head studs. ATI damper. Custom oil pan. All Electronics are MSD
Full length PG automatic transmission, pro tree transmission brake, 1.80 straight cut gear set with vasco output shaft, deep pan, 300-M steel input shaft and "Ultra-Bell" Ultra Case, Ultra Tail And SFI JW Wheel JW Ultra comp 10in converter.
1981 Aries K Dodge with Alston Pro Gas Mild Steel Round Tube Chassis, Chassis was just certified (NHRA) for the next 3 years. Strange Struts with Disk Brakes, Wilwood Rack &Pinion Steering, 4 Link with Koni Coil Over Adj Shocks, 8 3/4 Rear with Strange Spool and Axles, Weld Rear Disk Brakes, 14x32 Hoosiers on Weld Wheels, Stall Headers. "
"The engine is a 548ci Original Koffel B1 head and high rise intake with cast Aluminum B1 valve covers. With a done 1150 Holly carb. Built on a new Mopar Mega Block. Jessell Rockers and Belt Drive. Titan oil pump and pickup. Comp Cam Roller Cam with roller lifters and push rods, Valve springs and retainers. Eagle crank, JE Pistons, MGP Rods. Main Studs and lifter bores bushed. Head studs. ATI damper. Custom oil pan. All Electronics are MSD
Full length PG automatic transmission, pro tree transmission brake, 1.80 straight cut gear set with vasco output shaft, deep pan, 300-M steel input shaft and "Ultra-Bell" Ultra Case, Ultra Tail And SFI JW Wheel JW Ultra comp 10in converter.
1981 Aries K Dodge with Alston Pro Gas Mild Steel Round Tube Chassis, Chassis was just certified (NHRA) for the next 3 years. Strange Struts with Disk Brakes, Wilwood Rack &Pinion Steering, 4 Link with Koni Coil Over Adj Shocks, 8 3/4 Rear with Strange Spool and Axles, Weld Rear Disk Brakes, 14x32 Hoosiers on Weld Wheels, Stall Headers. "
Thread
Thread Starter
Forum
Replies
Last Post
News Feed
Drag Racing News (NHRA, IHRA, Outlaw)
0
Jan 23, 2006 04:00 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
