Tech Racing Tech

clear site plugs

Old 06-20-2005, 07:39 PM
Super Moderator
Thread Starter
fastbackcuda's Avatar
Join Date: Jul 2004
Location: CT
Posts: 188
clear site plugs

Anyone have a set of these on there Holley ?

Just a heads up. I went to lower my float level alittle today and couldnt see threw one of mine. It was very cloudy. I pulled it out and the threaded end was very soft and gummy.

I played with the needle and seat, put the plug back in and when I fired the car up fuel came shooting out of the vent tube. So I adjusted more, no differance.

I decided to pull the float bowl and found the threads came off the plug. Cleaned out the bowl, replaced the plug and no more problems.

If you run a set take a look at them. They dont seem to stand up to fuel very well.
fastbackcuda is offline  
Old 06-20-2005, 08:50 PM
Senior Member
sickt7cuda's Avatar
Join Date: Jul 2004
Location: Vernon, New Jersey
Posts: 278
I have them, and they haven't turned cloudy yet, but they are difficult to see exactly where the fuel level is at. I wound up taking them out anyway to set the floats.
sickt7cuda is offline  
Old 06-21-2005, 09:00 AM
Mopower71's Avatar
Join Date: Aug 2004
Location: Hopewell Jct., NY
Posts: 501
I just replaced the ones in mine cause they were cloudy. They were also overtightened
Mopower71 is offline  
Old 06-21-2005, 09:31 AM
Senior Member
82GT's Avatar
Join Date: Aug 2004
Location: Long Island, NY
Posts: 278
Ya I like the Demon site windows, but the site plugs become useless pretty quick
82GT is offline  
Related Topics
Thread Starter
Last Post
News Feed
Drag Racing News (NHRA, IHRA, Outlaw)
11-05-2005 08:00 AM
05-20-2005 07:32 PM
Atco Raceway
09-29-2004 07:20 AM
General Forum
09-03-2004 11:38 AM
07-28-2004 01:50 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Search this Thread
Quick Reply: clear site plugs