Engine/Chassis/Race Car Builders Information, recommendations, comments about Engine, Chassis & Race Car Builders.

yet another dumb question :D

Reply Subscribe
Thread Tools
 
Search this Thread
 
Old Mar 10, 2005 | 12:17 PM
  #1  
Khyron's Avatar
Thread Starter
Member
 
Joined: Feb 2005
Posts: 63
From: Saratoga Springs NY
yet another dumb question :D

O.k...heres the story. I have 3 engines.... I have the 360 magnum, Bad pistion, Bad Head, no intake. I have a 318, Bad pistion. I have a 360 in the car. bad bearings. The object is to make one good engine. the 318 has a good crane cam in it. I don't have allot of money. so here it is.

Can I take the magnum block, put the 318 crane cam into it. put the 360's heads on it. reuse the push rods and rockers from the 360. and replace the one bad piston?

all motors are complete. The magnum block is rock solid. It's just that with the lack of the mechanical fuel pump lobs on the magnums cam that make me want to put the 318's cam in it. are these interchangeable? I understand I need the 318's timing chain cover for the magnum. Also there is a double chain timeing gear on the 318

help! :P
Old Mar 10, 2005 | 02:02 PM
  #3  
Khyron's Avatar
Thread Starter
Member
 
Joined: Feb 2005
Posts: 63
From: Saratoga Springs NY
The 318 is actually the original 69 motor that was in my car. So I would say she's not


<waits for people to yell to me to put the original motor back in >
Old Mar 10, 2005 | 02:05 PM
  #4  
onehellofadart's Avatar
Super Moderator
 
Joined: Jul 2004
Posts: 886
From: Moonachie, NJ
Originally Posted by Khyron
The 318 is actually the original 69 motor that was in my car. So I would say she's not


<waits for people to yell to me to put the original motor back in >
Is the Charger all original except for the wheels?
If so put the original 318 back in it.
Old Mar 10, 2005 | 02:28 PM
  #5  
fastbackcuda's Avatar
Super Moderator
 
Joined: Jul 2004
Posts: 188
From: CT
You can run the cam from the 318 in the Magnum but it requires you to drill a hole for valve train oiling. Im not sure what hole or were though LOL.

I would run the roller cam from the 360 and just run an electric fuel pump.
Old Mar 10, 2005 | 02:41 PM
  #6  
Khyron's Avatar
Thread Starter
Member
 
Joined: Feb 2005
Posts: 63
From: Saratoga Springs NY
Originally Posted by onehellofadart
Is the Charger all original except for the wheels?
If so put the original 318 back in it.
heheh I knew someone would say it All the metal is not original. just the normal stuff that rots has been replaced. The more and more I pain over this. I may go that route. Just read the artical on forabodies.com about 330 horses out of a 318... not a screamer... but that could be fun

Still want to explore my options with this 360. I can get some more power for less money with this thing... I just gotta thing right.
Old Mar 10, 2005 | 03:06 PM
  #7  
fastbackcuda's Avatar
Super Moderator
 
Joined: Jul 2004
Posts: 188
From: CT
Originally Posted by Khyron
Just read the artical on forabodies.com .
Good site !

Hey I see your from Saratoga springs. I'll be at Lake Goegre for the Nationals this year.
Old Mar 10, 2005 | 06:50 PM
  #8  
Khyron's Avatar
Thread Starter
Member
 
Joined: Feb 2005
Posts: 63
From: Saratoga Springs NY
Originally Posted by fastbackcuda
Originally Posted by Khyron
Just read the artical on forabodies.com .
Good site !

Hey I see your from Saratoga springs. I'll be at Lake Goegre for the Nationals this year.
sweet, I never miss it. where do you normally hang out? I drive a bit then park up at the bowling alley. We'll have to try to get a much of people together :thumbsup:
Old Mar 10, 2005 | 07:42 PM
  #9  
fastbackcuda's Avatar
Super Moderator
 
Joined: Jul 2004
Posts: 188
From: CT
This will be my first year going. I cant remember were we're staying but I'll let you know. I may need someone to ride shot gun while we do some cruising at night.
Old Mar 11, 2005 | 09:18 AM
  #10  
Khyron's Avatar
Thread Starter
Member
 
Joined: Feb 2005
Posts: 63
From: Saratoga Springs NY
sounds good to me, I can park the Charger for a bit..... just a little bit
Old Mar 11, 2005 | 11:33 AM
  #11  
fastbackcuda's Avatar
Super Moderator
 
Joined: Jul 2004
Posts: 188
From: CT
Hey I forgot you had your own car LOL. We'll just have to cruise together. My buddy's bringing his 350 Vega too.
Old Mar 11, 2005 | 11:43 AM
  #12  
Khyron's Avatar
Thread Starter
Member
 
Joined: Feb 2005
Posts: 63
From: Saratoga Springs NY
sweet, I love those things. A friend of mine has an Opel. nothing like a big motor in a little car! hehehe
Old Mar 11, 2005 | 12:04 PM
  #13  
fastbackcuda's Avatar
Super Moderator
 
Joined: Jul 2004
Posts: 188
From: CT
His car runs pretty good for a real mild 350. He ran some 12.80s with it last year and pulled 1.80 60fts on a 235-60 radial.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
News Feed
Drag Racing News (NHRA, IHRA, Outlaw)
0
Aug 31, 2005 04:00 AM
launch
Cylinder Head Tech - Hosted by Racing Flow Development
1
Jul 17, 2005 11:36 AM
sickt7cuda
Parts for Sale
0
May 11, 2005 06:23 PM
Khyron
Engine/Chassis/Race Car Builders
20
Mar 12, 2005 05:17 PM
Mopower71
Test & Tune
32
Oct 11, 2004 04:51 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 01:44 PM.