Line Lock Problems
Guest
Posts: n/a
Line Lock Problems
I've been bleeding my brakes all day, and I keep getting more and more air in the lines. The line lock sounds like it's sucking in air when I step on the pedal. Is this possible? Is it worth trying to rebuild it or should I just replace it? Biondo has them for $39.99, if it's shot I guess I'll just buy a new one.
My neighbor said that he remembers from when he installed his line lock it was supposed to be up and down. Mine is side to side, does this make a difference?
My neighbor said that he remembers from when he installed his line lock it was supposed to be up and down. Mine is side to side, does this make a difference?
Super Moderator
Joined: Jul 2004
Posts: 886
From: Moonachie, NJ
It should be mounted up and down. I would think it spit when you stepped on the peddle and suck when you release.
Where is it sucking air from. Maybe you have a bad brake line or brake line connection.
I know they are rebuildable but for the price I would replace it if its the
unit itself.
Where is it sucking air from. Maybe you have a bad brake line or brake line connection.
I know they are rebuildable but for the price I would replace it if its the
unit itself.
Senior Member
Joined: Jul 2004
Posts: 278
From: Vernon, New Jersey
Like Tony said, it should be mounted upright with the brake lines out the sides. I've never tried to take one apart, but I'm sure it's a simple restricted orifice that, in your case, is most likely the victum of some dirt or debris. Try disconnecting the brake line, blow some hi pressure air through it backwards.
Guest
Posts: n/a
Originally Posted by sickt7cuda
Like Tony said, it should be mounted upright with the brake lines out the sides. I've never tried to take one apart, but I'm sure it's a simple restricted orifice that, in your case, is most likely the victum of some dirt or debris. Try disconnecting the brake line, blow some hi pressure air through it backwards.
Mine is a Biondo unit, the brake lines come out of either end, not the side.
I've already bypassed it, the "sucking" sound is gone, so I'm gonna assume that it's no good. I'm gonna re-bleed the front to make sure there's no air in there and I can get a good pedal, then I'll order a replacement.
Super Moderator
Joined: Jul 2004
Posts: 188
From: CT
Originally Posted by onehellofadart
Are you sure its not holding or are you pushing through them.
Roll through a little water pump them hit the button and then try it.
Roll through a little water pump them hit the button and then try it.
Administrator
Joined: Jun 2005
Posts: 119
hi..i had the B&M linelock on the mirada..and i hated it...it was slow to disengage...and after pushing my skinnies the first 25 or 30 feet a few times, i took it off, and havent looked back. in the CC national circuit, it seems that LOTS of guys in sportsman run them, but i cant figure out why.
Thread
Thread Starter
Forum
Replies
Last Post
News Feed
Drag Racing News (NHRA, IHRA, Outlaw)
0
Apr 2, 2006 04:00 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
